Payment & Shipping Terms:
|Tube Material:||Copper Tubes||Fin Material:||Hydrophilic Aluminum Foil Or Epoxy Resin Aluminum Foil|
|Frame Material:||Galvanized Steel Plate Or Stainless Steel||Power Supply:||380V/3P/50Hz Or 380V/3P/60Hz|
|Options:||Wet Curtain System And Spray System Is OK||Fan Brand:||Usually Chinese Brand|
|Frame Painting Colour:||White||Product Category:||Immersion Cooling Systems|
|Cooling Way:||Dielectric Liquid Cooling|
Copper tubes immersion air dry coolers,
Dielectric liquid immersion air dry coolers,
Dielectric Immersion Dry Coolers Unit
Copper Tubes Immersion Air Dry Coolers With Wet Curtain System
What's Immersion Cooling?
Also known as liquid submersion cooling. It is the practice of submerging computer components (or full servers) in a thermally, but not electrically, conductive liquid (dielectric coolant) allowing higher heat transfer performance than air and many other benefits.
Why many large data centers have already moved or are considering the move to immersion cooling?
1. Save floor space. Compare with traditional forced air cooling way(using precision air conditioner), immersion cooling system will save much floor space. Because no need rack system and no need air conditioner indoor.
2. Save power. Compare with traditional forced air cooling way(using precision air conditioner), immersion cooling system will save much power. For example, no need to install many air conditioners indoor, then no compressor power consumption. For example, the bitcoin miners no need air cooling fans. Thesewill save power around 18~25%.
3. Increase hardware lifepan. In immersion, machines operate in a 100% controlled environment with no dust, no temperature of humidity fluctuations, no impurities. This will extend the service life of the mining machine or server. This will also reduce machine maintainance fee.
4. Increase hashrate of the mining machine.
For bitcoin mining farm, if use immersion cooling system, our dry cooler is the most cost-effective way to remove heat and a necessary component of the immersion cooling system, We designed a full range of immersion optimized dry coolers. From 5kW single fan unit to the V-shaped 48-921kW dry coolers. Made in China, sized to your needs.
Also, we have whole immersion cooling system clients, they can also offer the whole system proposal for you.
|High efficiency heat exchanger: capacity designs for maximizing the heat transfer relative to the energy consumption of the fan. Tube and tube coupling design for low pressure drop in the coil on the media sides(maximum 100KPa at water designing condition). Our thermodynamic and aerodynamic designing software is long year tested and proved in Germany|
|Fan: only choose low specific energy consumption fans. Fan nozzle designs for maximum air flow and air throw.Our fans from the world`s leading manufacturer are practically proved to be reliable in operation and long lasting. Motor: protection class IP 54 and insulation class F. Air separator for each fan.|
|We facilitate you to have a long lasting and low maintainance operation. Durable material and rigid enclosure with hard gloss powder coated finish. Protective enclosure for both manifolds and U-bends. Unit design for outdoor installation. 100% leakage tested at 31bar.|
|Coil design refrigerant: water, oil, glycol.||Multiple circuits.|
|Sub-cooling circuits.||Stainless steel or aluminum casing.|
|Coated aluminum or copper fins.||Explosion proof motor.|
|Customized fin spacing.|
Dry cooler D1 series parameter (fin space 2.1mm)
|Capacity||Water||35℃ outdoor temp.||Inlet||45℃||△||KW||4.89||5.9||6.83||9.39||10.99||13.33||14.32||17.01||19.8|
|Fan||No X φ||1x1x350||1x1x350||1x1x350||1x1x450||1x1x450||1x1x450||1x1x500||1x1x500||1x1x500|
|Sound pressure level||△||dB(A)||31||31||31||43||43||43||49||49||49|
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for horizontal air discharge please add “H” in nomenclature, for excmple:SHSL-D1-005H-1X350
Why choose us:
1) We can help buyers design specific products or produce products according to buyers' design
2) We can print logo according to buyers' requirement
3) We has exported to many countries,such as Singapore, Philippines, Vietnam, Argentina, Peru, Mongolia, Hong Kong, UAE,Russia, Poland etc.
4) Design term:We have professional design team.
5) Professional factory: We are manufacturer, specializing in manufacturing heat exchangers for over 16years, competitive price with good quality.
6)Rapid response to your needs: We will reply within 24 hours after receiving you letter. If you have urgent thing, welcome to call us.
7)The Most Efficient Service, Best Quality and Excellent Reputation.
Contact Person: Sunny